78 .ie t \(bu
79 .el o
80 SAP (Service Access Point) length value is -2, meaning the physical address
81 component is followed immediately by a 2-byte SAP component within the DLSAP
82 address.
83 .RE
84 .RS +4
85 .TP
86 .ie t \(bu
87 .el o
88 Broadcast address value is the Ethernet/IEEE broadcast address
89 (FF:FF:FF:FF:FF:FF).
90 .sp
91 Once in the DL_ATTACHED state, you must send a DL_BIND_REQ to associate a
92 particular SAP with the stream.
93 .RE
94 .SH CONFIGURATION
95 .sp
96 .LP
97 By default, the \fBixgbe\fR driver performs auto-negotiation to select the link
98 speed and mode. Link speed and mode can only be 10000 Mbps full-duplex. See the
99 \fIIEEE802.3\fR standard for more information.
100 .SH FILES
101 .sp
102 .ne 2
103 .na
104 \fB\fB/dev/ixgbe*\fR\fR
105 .ad
106 .RS 29n
107 Special character device.
108 .RE
109
110 .sp
111 .ne 2
112 .na
113 \fB\fB/kernel/drv/ixgbe\fR\fR
114 .ad
115 .RS 29n
116 32-bit device driver (x86).
117 .RE
118
|
78 .ie t \(bu
79 .el o
80 SAP (Service Access Point) length value is -2, meaning the physical address
81 component is followed immediately by a 2-byte SAP component within the DLSAP
82 address.
83 .RE
84 .RS +4
85 .TP
86 .ie t \(bu
87 .el o
88 Broadcast address value is the Ethernet/IEEE broadcast address
89 (FF:FF:FF:FF:FF:FF).
90 .sp
91 Once in the DL_ATTACHED state, you must send a DL_BIND_REQ to associate a
92 particular SAP with the stream.
93 .RE
94 .SH CONFIGURATION
95 .sp
96 .LP
97 By default, the \fBixgbe\fR driver performs auto-negotiation to select the link
98 speed and mode. Link speed and mode can only be 10000 Mbps full-duplex for fiber, and only 10000, 1000, or 100 Mbps full-duplex for copper. See the
99 \fIIEEE802.3\fR standard for more information.
100 .SH FILES
101 .sp
102 .ne 2
103 .na
104 \fB\fB/dev/ixgbe*\fR\fR
105 .ad
106 .RS 29n
107 Special character device.
108 .RE
109
110 .sp
111 .ne 2
112 .na
113 \fB\fB/kernel/drv/ixgbe\fR\fR
114 .ad
115 .RS 29n
116 32-bit device driver (x86).
117 .RE
118
|