Print this page
XXXX Intel X540 support
@@ -28,55 +28,28 @@
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
******************************************************************************/
-/*$FreeBSD$*/
+/*$FreeBSD: src/sys/dev/ixgbe/ixgbe_82599.c,v 1.8 2012/07/05 20:51:44 jfv Exp $*/
#include "ixgbe_type.h"
+#include "ixgbe_82599.h"
#include "ixgbe_api.h"
#include "ixgbe_common.h"
#include "ixgbe_phy.h"
-s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw);
-s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *autoneg);
-enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw);
-void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
-void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
-void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
-s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
- bool autoneg_wait_to_complete);
-s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
- bool autoneg_wait_to_complete);
-s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
- bool autoneg_wait_to_complete);
-s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete);
static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
bool autoneg,
bool autoneg_wait_to_complete);
-s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw);
-void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw);
-s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw);
-s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val);
-s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val);
-s32 ixgbe_start_hw_rev_1_82599(struct ixgbe_hw *hw);
-s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw);
-s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw);
-u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw);
-s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval);
static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
-bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
+static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
+ u16 offset, u16 *data);
+static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
-
void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
DEBUGFUNC("ixgbe_init_mac_link_ops_82599");
@@ -150,14 +123,10 @@
phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
phy->ops.check_link = &ixgbe_check_phy_link_tnx;
phy->ops.get_firmware_version =
&ixgbe_get_phy_firmware_version_tnx;
break;
- case ixgbe_phy_aq:
- phy->ops.get_firmware_version =
- &ixgbe_get_phy_firmware_version_generic;
- break;
default:
break;
}
init_phy_ops_out:
return ret_val;
@@ -181,11 +150,12 @@
&data_offset);
if (ret_val != IXGBE_SUCCESS)
goto setup_sfp_out;
/* PHY config will finish before releasing the semaphore */
- ret_val = ixgbe_acquire_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+ ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
if (ret_val != IXGBE_SUCCESS) {
ret_val = IXGBE_ERR_SWFW_SYNC;
goto setup_sfp_out;
}
@@ -195,11 +165,11 @@
IXGBE_WRITE_FLUSH(hw);
hw->eeprom.ops.read(hw, ++data_offset, &data_value);
}
/* Release the semaphore */
- ixgbe_release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
/* Delay obtaining semaphore again to allow FW access */
msec_delay(hw->eeprom.semaphore_delay);
/* Now restart DSP by setting Restart_AN and clearing LMS */
IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw,
@@ -239,10 +209,11 @@
s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
struct ixgbe_phy_info *phy = &hw->phy;
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
s32 ret_val;
DEBUGFUNC("ixgbe_init_ops_82599");
ret_val = ixgbe_init_phy_ops_generic(hw);
@@ -256,35 +227,40 @@
mac->ops.reset_hw = &ixgbe_reset_hw_82599;
mac->ops.enable_relaxed_ordering = &ixgbe_enable_relaxed_ordering_gen2;
mac->ops.get_media_type = &ixgbe_get_media_type_82599;
mac->ops.get_supported_physical_layer =
&ixgbe_get_supported_physical_layer_82599;
+ mac->ops.disable_sec_rx_path = &ixgbe_disable_sec_rx_path_generic;
+ mac->ops.enable_sec_rx_path = &ixgbe_enable_sec_rx_path_generic;
mac->ops.enable_rx_dma = &ixgbe_enable_rx_dma_82599;
mac->ops.read_analog_reg8 = &ixgbe_read_analog_reg8_82599;
mac->ops.write_analog_reg8 = &ixgbe_write_analog_reg8_82599;
- mac->ops.start_hw = &ixgbe_start_hw_rev_1_82599;
+ mac->ops.start_hw = &ixgbe_start_hw_82599;
mac->ops.get_san_mac_addr = &ixgbe_get_san_mac_addr_generic;
mac->ops.set_san_mac_addr = &ixgbe_set_san_mac_addr_generic;
mac->ops.get_device_caps = &ixgbe_get_device_caps_generic;
mac->ops.get_wwn_prefix = &ixgbe_get_wwn_prefix_generic;
mac->ops.get_fcoe_boot_status = &ixgbe_get_fcoe_boot_status_generic;
/* RAR, Multicast, VLAN */
mac->ops.set_vmdq = &ixgbe_set_vmdq_generic;
+ mac->ops.set_vmdq_san_mac = &ixgbe_set_vmdq_san_mac_generic;
mac->ops.clear_vmdq = &ixgbe_clear_vmdq_generic;
mac->ops.insert_mac_addr = &ixgbe_insert_mac_addr_generic;
mac->rar_highwater = 1;
mac->ops.set_vfta = &ixgbe_set_vfta_generic;
+ mac->ops.set_vlvf = &ixgbe_set_vlvf_generic;
mac->ops.clear_vfta = &ixgbe_clear_vfta_generic;
mac->ops.init_uta_tables = &ixgbe_init_uta_tables_generic;
mac->ops.setup_sfp = &ixgbe_setup_sfp_modules_82599;
mac->ops.set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing;
mac->ops.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing;
/* Link */
mac->ops.get_link_capabilities = &ixgbe_get_link_capabilities_82599;
mac->ops.check_link = &ixgbe_check_mac_link_generic;
+ mac->ops.setup_rxpba = &ixgbe_set_rxpba_generic;
ixgbe_init_mac_link_ops_82599(hw);
mac->mcft_size = 128;
mac->vft_size = 128;
mac->num_rar_entries = 128;
@@ -291,10 +267,23 @@
mac->rx_pb_size = 512;
mac->max_tx_queues = 128;
mac->max_rx_queues = 128;
mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
+ mac->arc_subsystem_valid = (IXGBE_READ_REG(hw, IXGBE_FWSM) &
+ IXGBE_FWSM_MODE_MASK) ? TRUE : FALSE;
+
+ hw->mbx.ops.init_params = ixgbe_init_mbx_params_pf;
+
+ /* EEPROM */
+ eeprom->ops.read = &ixgbe_read_eeprom_82599;
+ eeprom->ops.read_buffer = &ixgbe_read_eeprom_buffer_82599;
+
+ /* Manageability interface */
+ mac->ops.set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic;
+
+
return ret_val;
}
/**
* ixgbe_get_link_capabilities_82599 - Determines link capabilities
@@ -314,11 +303,13 @@
DEBUGFUNC("ixgbe_get_link_capabilities_82599");
/* Check if 1G SFP module. */
if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
- hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) {
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
*speed = IXGBE_LINK_SPEED_1GB_FULL;
*negotiation = TRUE;
goto out;
}
@@ -410,11 +401,10 @@
/* Detect if there is a copper PHY attached. */
switch (hw->phy.type) {
case ixgbe_phy_cu_unknown:
case ixgbe_phy_tn:
- case ixgbe_phy_aq:
media_type = ixgbe_media_type_copper;
goto out;
default:
break;
}
@@ -961,11 +951,11 @@
/* Setup the PHY according to input speed */
status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
autoneg_wait_to_complete);
/* Set up MAC */
- (void) ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete);
+ ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete);
return status;
}
/**
@@ -976,21 +966,25 @@
* and clears all interrupts, perform a PHY reset, and perform a link (MAC)
* reset.
**/
s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
{
- s32 status = IXGBE_SUCCESS;
- u32 ctrl;
- u32 i;
- u32 autoc;
- u32 autoc2;
+ ixgbe_link_speed link_speed;
+ s32 status;
+ u32 ctrl, i, autoc, autoc2;
+ bool link_up = FALSE;
DEBUGFUNC("ixgbe_reset_hw_82599");
/* Call adapter stop to disable tx/rx and clear interrupts */
- hw->mac.ops.stop_adapter(hw);
+ status = hw->mac.ops.stop_adapter(hw);
+ if (status != IXGBE_SUCCESS)
+ goto reset_hw_out;
+ /* flush pending Tx transactions */
+ ixgbe_clear_tx_pending(hw);
+
/* PHY ops must be identified and initialized prior to reset */
/* Identify PHY and related function pointers */
status = hw->phy.ops.init(hw);
@@ -1008,52 +1002,53 @@
/* Reset PHY */
if (hw->phy.reset_disable == FALSE && hw->phy.ops.reset != NULL)
hw->phy.ops.reset(hw);
- /*
- * Prevent the PCI-E bus from from hanging by disabling PCI-E master
- * access and verify no pending requests before reset
- */
- (void) ixgbe_disable_pcie_master(hw);
-
mac_reset_top:
/*
- * Issue global reset to the MAC. This needs to be a SW reset.
- * If link reset is used, it might reset the MAC when mng is using it
+ * Issue global reset to the MAC. Needs to be SW reset if link is up.
+ * If link reset is used when link is up, it might reset the PHY when
+ * mng is using it. If link is down or the flag to force full link
+ * reset is set, then perform link reset.
*/
- ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
- IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
+ ctrl = IXGBE_CTRL_LNK_RST;
+ if (!hw->force_full_reset) {
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, FALSE);
+ if (link_up)
+ ctrl = IXGBE_CTRL_RST;
+ }
+
+ ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
IXGBE_WRITE_FLUSH(hw);
/* Poll for reset bit to self-clear indicating reset is complete */
for (i = 0; i < 10; i++) {
usec_delay(1);
ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
- if (!(ctrl & IXGBE_CTRL_RST))
+ if (!(ctrl & IXGBE_CTRL_RST_MASK))
break;
}
- if (ctrl & IXGBE_CTRL_RST) {
+
+ if (ctrl & IXGBE_CTRL_RST_MASK) {
status = IXGBE_ERR_RESET_FAILED;
DEBUGOUT("Reset polling failed to complete.\n");
}
+ msec_delay(50);
+
/*
* Double resets are required for recovery from certain error
* conditions. Between resets, it is necessary to stall to allow time
- * for any pending HW events to complete. We use 1usec since that is
- * what is needed for ixgbe_disable_pcie_master(). The second reset
- * then clears out any effects of those events.
+ * for any pending HW events to complete.
*/
if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
- usec_delay(1);
goto mac_reset_top;
}
- msec_delay(50);
-
/*
* Store the original AUTOC/AUTOC2 values if they have not been
* stored off yet. Otherwise restore the stored original
* values since the reset operation sets back to defaults.
*/
@@ -1094,10 +1089,13 @@
/* Add the SAN MAC address to the RAR only if it's a valid address */
if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
hw->mac.san_addr, 0, IXGBE_RAH_AV);
+ /* Save the SAN MAC RAR index */
+ hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1;
+
/* Reserve the last RAR for the SAN MAC address */
hw->mac.num_rar_entries--;
}
/* Store the alternative WWNN/WWPN prefix */
@@ -1130,11 +1128,11 @@
break;
usec_delay(10);
}
if (i >= IXGBE_FDIRCMD_CMD_POLL) {
DEBUGOUT("Flow Director previous command isn't complete, "
- "aborting table re-initialization. \n");
+ "aborting table re-initialization.\n");
return IXGBE_ERR_FDIR_REINIT_FAILED;
}
IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0);
IXGBE_WRITE_FLUSH(hw);
@@ -1174,78 +1172,30 @@
DEBUGOUT("Flow Director Signature poll time exceeded!\n");
return IXGBE_ERR_FDIR_REINIT_FAILED;
}
/* Clear FDIR statistics registers (read to clear) */
- (void) IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT);
- (void) IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT);
- (void) IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
- (void) IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
- (void) IXGBE_READ_REG(hw, IXGBE_FDIRLEN);
+ IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT);
+ IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT);
+ IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
+ IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
+ IXGBE_READ_REG(hw, IXGBE_FDIRLEN);
return IXGBE_SUCCESS;
}
/**
- * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters
+ * ixgbe_fdir_enable_82599 - Initialize Flow Director control registers
* @hw: pointer to hardware structure
- * @pballoc: which mode to allocate filters with
+ * @fdirctrl: value to write to flow director control register
**/
-s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc)
+static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl)
{
- u32 fdirctrl = 0;
- u32 pbsize;
int i;
- DEBUGFUNC("ixgbe_init_fdir_signature_82599");
+ DEBUGFUNC("ixgbe_fdir_enable_82599");
- /*
- * Before enabling Flow Director, the Rx Packet Buffer size
- * must be reduced. The new value is the current size minus
- * flow director memory usage size.
- */
- pbsize = (1 << (IXGBE_FDIR_PBALLOC_SIZE_SHIFT + pballoc));
- IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0),
- (IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(0)) - pbsize));
-
- /*
- * The defaults in the HW for RX PB 1-7 are not zero and so should be
- * intialized to zero for non DCB mode otherwise actual total RX PB
- * would be bigger than programmed and filter space would run into
- * the PB 0 region.
- */
- for (i = 1; i < 8; i++)
- IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
-
- /* Send interrupt when 64 filters are left */
- fdirctrl |= 4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT;
-
- /* Set the maximum length per hash bucket to 0xA filters */
- fdirctrl |= 0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT;
-
- switch (pballoc) {
- case IXGBE_FDIR_PBALLOC_64K:
- /* 8k - 1 signature filters */
- fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_64K;
- break;
- case IXGBE_FDIR_PBALLOC_128K:
- /* 16k - 1 signature filters */
- fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_128K;
- break;
- case IXGBE_FDIR_PBALLOC_256K:
- /* 32k - 1 signature filters */
- fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_256K;
- break;
- default:
- /* bad value */
- return IXGBE_ERR_CONFIG;
- };
-
- /* Move the flexible bytes to use the ethertype - shift 6 words */
- fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT);
-
-
/* Prime the keys for hashing */
IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY);
IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY);
/*
@@ -1267,201 +1217,71 @@
if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
IXGBE_FDIRCTRL_INIT_DONE)
break;
msec_delay(1);
}
- if (i >= IXGBE_FDIR_INIT_DONE_POLL)
- DEBUGOUT("Flow Director Signature poll time exceeded!\n");
- return IXGBE_SUCCESS;
+ if (i >= IXGBE_FDIR_INIT_DONE_POLL)
+ DEBUGOUT("Flow Director poll time exceeded!\n");
}
/**
- * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters
+ * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters
* @hw: pointer to hardware structure
- * @pballoc: which mode to allocate filters with
+ * @fdirctrl: value to write to flow director control register, initially
+ * contains just the value of the Rx packet buffer allocation
**/
-s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc)
+s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
{
- u32 fdirctrl = 0;
- u32 pbsize;
- int i;
+ DEBUGFUNC("ixgbe_init_fdir_signature_82599");
- DEBUGFUNC("ixgbe_init_fdir_perfect_82599");
-
/*
- * Before enabling Flow Director, the Rx Packet Buffer size
- * must be reduced. The new value is the current size minus
- * flow director memory usage size.
+ * Continue setup of fdirctrl register bits:
+ * Move the flexible bytes to use the ethertype - shift 6 words
+ * Set the maximum length per hash bucket to 0xA filters
+ * Send interrupt when 64 filters are left
*/
- pbsize = (1 << (IXGBE_FDIR_PBALLOC_SIZE_SHIFT + pballoc));
- IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0),
- (IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(0)) - pbsize));
+ fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
+ (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
+ (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
- /*
- * The defaults in the HW for RX PB 1-7 are not zero and so should be
- * intialized to zero for non DCB mode otherwise actual total RX PB
- * would be bigger than programmed and filter space would run into
- * the PB 0 region.
- */
- for (i = 1; i < 8; i++)
- IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
+ /* write hashes and fdirctrl register, poll for completion */
+ ixgbe_fdir_enable_82599(hw, fdirctrl);
- /* Send interrupt when 64 filters are left */
- fdirctrl |= 4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT;
-
- /* Initialize the drop queue to Rx queue 127 */
- fdirctrl |= (127 << IXGBE_FDIRCTRL_DROP_Q_SHIFT);
-
- switch (pballoc) {
- case IXGBE_FDIR_PBALLOC_64K:
- /* 2k - 1 perfect filters */
- fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_64K;
- break;
- case IXGBE_FDIR_PBALLOC_128K:
- /* 4k - 1 perfect filters */
- fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_128K;
- break;
- case IXGBE_FDIR_PBALLOC_256K:
- /* 8k - 1 perfect filters */
- fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_256K;
- break;
- default:
- /* bad value */
- return IXGBE_ERR_CONFIG;
- };
-
- /* Turn perfect match filtering on */
- fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH;
- fdirctrl |= IXGBE_FDIRCTRL_REPORT_STATUS;
-
- /* Move the flexible bytes to use the ethertype - shift 6 words */
- fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT);
-
- /* Prime the keys for hashing */
- IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY,IXGBE_ATR_SIGNATURE_HASH_KEY);
-
- /*
- * Poll init-done after we write the register. Estimated times:
- * 10G: PBALLOC = 11b, timing is 60us
- * 1G: PBALLOC = 11b, timing is 600us
- * 100M: PBALLOC = 11b, timing is 6ms
- *
- * Multiple these timings by 4 if under full Rx load
- *
- * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for
- * 1 msec per poll time. If we're at line rate and drop to 100M, then
- * this might not finish in our poll time, but we can live with that
- * for now.
- */
-
- /* Set the maximum length per hash bucket to 0xA filters */
- fdirctrl |= (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT);
-
- IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
- IXGBE_WRITE_FLUSH(hw);
- for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
- if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
- IXGBE_FDIRCTRL_INIT_DONE)
- break;
- msec_delay(1);
- }
- if (i >= IXGBE_FDIR_INIT_DONE_POLL)
- DEBUGOUT("Flow Director Perfect poll time exceeded!\n");
-
return IXGBE_SUCCESS;
}
/**
- * ixgbe_atr_compute_hash_82599 - Compute the hashes for SW ATR
- * @stream: input bitstream to compute the hash on
- * @key: 32-bit hash key
+ * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters
+ * @hw: pointer to hardware structure
+ * @fdirctrl: value to write to flow director control register, initially
+ * contains just the value of the Rx packet buffer allocation
**/
-u32 ixgbe_atr_compute_hash_82599(union ixgbe_atr_input *atr_input,
- u32 key)
+s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl)
{
- /*
- * The algorithm is as follows:
- * Hash[15:0] = Sum { S[n] x K[n+16] }, n = 0...350
- * where Sum {A[n]}, n = 0...n is bitwise XOR of A[0], A[1]...A[n]
- * and A[n] x B[n] is bitwise AND between same length strings
- *
- * K[n] is 16 bits, defined as:
- * for n modulo 32 >= 15, K[n] = K[n % 32 : (n % 32) - 15]
- * for n modulo 32 < 15, K[n] =
- * K[(n % 32:0) | (31:31 - (14 - (n % 32)))]
- *
- * S[n] is 16 bits, defined as:
- * for n >= 15, S[n] = S[n:n - 15]
- * for n < 15, S[n] = S[(n:0) | (350:350 - (14 - n))]
- *
- * To simplify for programming, the algorithm is implemented
- * in software this way:
- *
- * key[31:0], hi_hash_dword[31:0], lo_hash_dword[31:0], hash[15:0]
- *
- * for (i = 0; i < 352; i+=32)
- * hi_hash_dword[31:0] ^= Stream[(i+31):i];
- *
- * lo_hash_dword[15:0] ^= Stream[15:0];
- * lo_hash_dword[15:0] ^= hi_hash_dword[31:16];
- * lo_hash_dword[31:16] ^= hi_hash_dword[15:0];
- *
- * hi_hash_dword[31:0] ^= Stream[351:320];
- *
- * if(key[0])
- * hash[15:0] ^= Stream[15:0];
- *
- * for (i = 0; i < 16; i++) {
- * if (key[i])
- * hash[15:0] ^= lo_hash_dword[(i+15):i];
- * if (key[i + 16])
- * hash[15:0] ^= hi_hash_dword[(i+15):i];
- * }
- *
- */
- __be32 common_hash_dword = 0;
- u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
- u32 hash_result = 0;
- u8 i;
+ DEBUGFUNC("ixgbe_init_fdir_perfect_82599");
- /* record the flow_vm_vlan bits as they are a key part to the hash */
- flow_vm_vlan = IXGBE_NTOHL(atr_input->dword_stream[0]);
-
- /* generate common hash dword */
- for (i = 10; i; i -= 2)
- common_hash_dword ^= atr_input->dword_stream[i] ^
- atr_input->dword_stream[i - 1];
-
- hi_hash_dword = IXGBE_NTOHL(common_hash_dword);
-
- /* low dword is word swapped version of common */
- lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
-
- /* apply flow ID/VM pool/VLAN ID bits to hash words */
- hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
-
- /* Process bits 0 and 16 */
- if (key & 0x0001) hash_result ^= lo_hash_dword;
- if (key & 0x00010000) hash_result ^= hi_hash_dword;
-
/*
- * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
- * delay this because bit 0 of the stream should not be processed
- * so we do not add the vlan until after bit 0 was processed
+ * Continue setup of fdirctrl register bits:
+ * Turn perfect match filtering on
+ * Report hash in RSS field of Rx wb descriptor
+ * Initialize the drop queue
+ * Move the flexible bytes to use the ethertype - shift 6 words
+ * Set the maximum length per hash bucket to 0xA filters
+ * Send interrupt when 64 (0x4 * 16) filters are left
*/
- lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
+ fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH |
+ IXGBE_FDIRCTRL_REPORT_STATUS |
+ (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) |
+ (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
+ (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
+ (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
+ /* write hashes and fdirctrl register, poll for completion */
+ ixgbe_fdir_enable_82599(hw, fdirctrl);
- /* process the remaining 30 bits in the key 2 bits at a time */
- for (i = 15; i; i-- ) {
- if (key & (0x0001 << i)) hash_result ^= lo_hash_dword >> i;
- if (key & (0x00010000 << i)) hash_result ^= hi_hash_dword >> i;
- }
-
- return hash_result & IXGBE_ATR_HASH_MASK;
+ return IXGBE_SUCCESS;
}
/*
* These defines allow us to quickly generate all of the necessary instructions
* in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION
@@ -1468,11 +1288,11 @@
* for values 0 through 15
*/
#define IXGBE_ATR_COMMON_HASH_KEY \
(IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY)
#define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \
-{ \
+do { \
u32 n = (_n); \
if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \
common_hash ^= lo_hash_dword >> n; \
else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
bucket_hash ^= lo_hash_dword >> n; \
@@ -1482,11 +1302,11 @@
common_hash ^= hi_hash_dword >> n; \
else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
bucket_hash ^= hi_hash_dword >> n; \
else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \
sig_hash ^= hi_hash_dword << (16 - n); \
-}
+} while (0);
/**
* ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
* @stream: input bitstream to compute the hash on
*
@@ -1494,11 +1314,11 @@
* several optomizations such as unwinding all of the loops, letting the
* compiler work out all of the conditional ifs since the keys are static
* defines, and computing two keys at once since the hashed dword stream
* will be the same for both keys.
**/
-static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
+u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
union ixgbe_atr_hash_dword common)
{
u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
u32 sig_hash = 0, bucket_hash = 0, common_hash = 0;
@@ -1553,11 +1373,12 @@
}
/**
* ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
* @hw: pointer to hardware structure
- * @stream: input bitstream
+ * @input: unique input dword
+ * @common: compressed common input dword
* @queue: queue index to direct traffic to
**/
s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
union ixgbe_atr_hash_dword input,
union ixgbe_atr_hash_dword common,
@@ -1602,24 +1423,119 @@
DEBUGOUT2("Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd);
return IXGBE_SUCCESS;
}
+#define IXGBE_COMPUTE_BKT_HASH_ITERATION(_n) \
+do { \
+ u32 n = (_n); \
+ if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
+ bucket_hash ^= lo_hash_dword >> n; \
+ if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
+ bucket_hash ^= hi_hash_dword >> n; \
+} while (0);
+
/**
+ * ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
+ * @atr_input: input bitstream to compute the hash on
+ * @input_mask: mask for the input bitstream
+ *
+ * This function serves two main purposes. First it applys the input_mask
+ * to the atr_input resulting in a cleaned up atr_input data stream.
+ * Secondly it computes the hash and stores it in the bkt_hash field at
+ * the end of the input byte stream. This way it will be available for
+ * future use without needing to recompute the hash.
+ **/
+void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
+ union ixgbe_atr_input *input_mask)
+{
+
+ u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
+ u32 bucket_hash = 0;
+
+ /* Apply masks to input data */
+ input->dword_stream[0] &= input_mask->dword_stream[0];
+ input->dword_stream[1] &= input_mask->dword_stream[1];
+ input->dword_stream[2] &= input_mask->dword_stream[2];
+ input->dword_stream[3] &= input_mask->dword_stream[3];
+ input->dword_stream[4] &= input_mask->dword_stream[4];
+ input->dword_stream[5] &= input_mask->dword_stream[5];
+ input->dword_stream[6] &= input_mask->dword_stream[6];
+ input->dword_stream[7] &= input_mask->dword_stream[7];
+ input->dword_stream[8] &= input_mask->dword_stream[8];
+ input->dword_stream[9] &= input_mask->dword_stream[9];
+ input->dword_stream[10] &= input_mask->dword_stream[10];
+
+ /* record the flow_vm_vlan bits as they are a key part to the hash */
+ flow_vm_vlan = IXGBE_NTOHL(input->dword_stream[0]);
+
+ /* generate common hash dword */
+ hi_hash_dword = IXGBE_NTOHL(input->dword_stream[1] ^
+ input->dword_stream[2] ^
+ input->dword_stream[3] ^
+ input->dword_stream[4] ^
+ input->dword_stream[5] ^
+ input->dword_stream[6] ^
+ input->dword_stream[7] ^
+ input->dword_stream[8] ^
+ input->dword_stream[9] ^
+ input->dword_stream[10]);
+
+ /* low dword is word swapped version of common */
+ lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
+
+ /* apply flow ID/VM pool/VLAN ID bits to hash words */
+ hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
+
+ /* Process bits 0 and 16 */
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(0);
+
+ /*
+ * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
+ * delay this because bit 0 of the stream should not be processed
+ * so we do not add the vlan until after bit 0 was processed
+ */
+ lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
+
+ /* Process remaining 30 bit of the key */
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(1);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(2);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(3);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(4);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(5);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(6);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(7);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(8);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(9);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(10);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(11);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(12);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(13);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(14);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(15);
+
+ /*
+ * Limit hash to 13 bits since max bucket count is 8K.
+ * Store result at the end of the input stream.
+ */
+ input->formatted.bkt_hash = bucket_hash & 0x1FFF;
+}
+
+/**
* ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks
* @input_mask: mask to be bit swapped
*
* The source and destination port masks for flow director are bit swapped
* in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to
* generate a correctly swapped value we need to bit swap the mask and that
* is what is accomplished by this function.
**/
-static u32 ixgbe_get_fdirtcpm_82599(struct ixgbe_atr_input_masks *input_masks)
+static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask)
{
- u32 mask = IXGBE_NTOHS(input_masks->dst_port_mask);
+ u32 mask = IXGBE_NTOHS(input_mask->formatted.dst_port);
mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT;
- mask |= IXGBE_NTOHS(input_masks->src_port_mask);
+ mask |= IXGBE_NTOHS(input_mask->formatted.src_port);
mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1);
mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2);
mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4);
return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8);
}
@@ -1637,165 +1553,273 @@
#define IXGBE_WRITE_REG_BE32(a, reg, value) \
IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(IXGBE_NTOHL(value)))
#define IXGBE_STORE_AS_BE16(_value) \
- (((u16)(_value) >> 8) | ((u16)(_value) << 8))
+ IXGBE_NTOHS(((u16)(_value) >> 8) | ((u16)(_value) << 8))
-
-/**
- * ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter
- * @hw: pointer to hardware structure
- * @input: input bitstream
- * @input_masks: masks for the input bitstream
- * @soft_id: software index for the filters
- * @queue: queue index to direct traffic to
- *
- * Note that the caller to this function must lock before calling, since the
- * hardware writes must be protected from one another.
- **/
-s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
- union ixgbe_atr_input *input,
- struct ixgbe_atr_input_masks *input_masks,
- u16 soft_id, u8 queue)
+s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input_mask)
{
- u32 fdirhash;
- u32 fdircmd;
- u32 fdirport, fdirtcpm;
- u32 fdirvlan;
- /* start with VLAN, flex bytes, VM pool, and IPv6 destination masked */
- u32 fdirm = IXGBE_FDIRM_VLANID | IXGBE_FDIRM_VLANP | IXGBE_FDIRM_FLEX |
- IXGBE_FDIRM_POOL | IXGBE_FDIRM_DIPv6;
+ /* mask IPv6 since it is currently not supported */
+ u32 fdirm = IXGBE_FDIRM_DIPv6;
+ u32 fdirtcpm;
- DEBUGFUNC("ixgbe_fdir_add_perfect_filter_82599");
+ DEBUGFUNC("ixgbe_fdir_set_atr_input_mask_82599");
/*
- * Check flow_type formatting, and bail out before we touch the hardware
- * if there's a configuration issue
- */
- switch (input->formatted.flow_type) {
- case IXGBE_ATR_FLOW_TYPE_IPV4:
- /* use the L4 protocol mask for raw IPv4/IPv6 traffic */
- fdirm |= IXGBE_FDIRM_L4P;
- /* FALLTHRU */
- case IXGBE_ATR_FLOW_TYPE_SCTPV4:
- if (input_masks->dst_port_mask || input_masks->src_port_mask) {
- DEBUGOUT(" Error on src/dst port mask\n");
- return IXGBE_ERR_CONFIG;
- }
- break;
- case IXGBE_ATR_FLOW_TYPE_TCPV4:
- break;
- case IXGBE_ATR_FLOW_TYPE_UDPV4:
- break;
- default:
- DEBUGOUT(" Error on flow type input\n");
- return IXGBE_ERR_CONFIG;
- }
-
- /*
* Program the relevant mask registers. If src/dst_port or src/dst_addr
* are zero, then assume a full mask for that field. Also assume that
* a VLAN of 0 is unspecified, so mask that out as well. L4type
* cannot be masked out in this implementation.
*
* This also assumes IPv4 only. IPv6 masking isn't supported at this
* point in time.
*/
- /* Program FDIRM */
- switch (IXGBE_NTOHS(input_masks->vlan_id_mask) & 0xEFFF) {
- case 0xEFFF:
- /* Unmask VLAN ID - bit 0 and fall through to unmask prio */
- fdirm &= ~IXGBE_FDIRM_VLANID;
- /* FALLTHRU */
- case 0xE000:
- /* Unmask VLAN prio - bit 1 */
- fdirm &= ~IXGBE_FDIRM_VLANP;
+ /* verify bucket hash is cleared on hash generation */
+ if (input_mask->formatted.bkt_hash)
+ DEBUGOUT(" bucket hash should always be 0 in mask\n");
+
+ /* Program FDIRM and verify partial masks */
+ switch (input_mask->formatted.vm_pool & 0x7F) {
+ case 0x0:
+ fdirm |= IXGBE_FDIRM_POOL;
+ case 0x7F:
break;
- case 0x0FFF:
- /* Unmask VLAN ID - bit 0 */
- fdirm &= ~IXGBE_FDIRM_VLANID;
+ default:
+ DEBUGOUT(" Error on vm pool mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ switch (input_mask->formatted.flow_type & IXGBE_ATR_L4TYPE_MASK) {
+ case 0x0:
+ fdirm |= IXGBE_FDIRM_L4P;
+ if (input_mask->formatted.dst_port ||
+ input_mask->formatted.src_port) {
+ DEBUGOUT(" Error on src/dst port mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+ case IXGBE_ATR_L4TYPE_MASK:
break;
+ default:
+ DEBUGOUT(" Error on flow type mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ switch (IXGBE_NTOHS(input_mask->formatted.vlan_id) & 0xEFFF) {
case 0x0000:
- /* do nothing, vlans already masked */
+ /* mask VLAN ID, fall through to mask VLAN priority */
+ fdirm |= IXGBE_FDIRM_VLANID;
+ case 0x0FFF:
+ /* mask VLAN priority */
+ fdirm |= IXGBE_FDIRM_VLANP;
break;
+ case 0xE000:
+ /* mask VLAN ID only, fall through */
+ fdirm |= IXGBE_FDIRM_VLANID;
+ case 0xEFFF:
+ /* no VLAN fields masked */
+ break;
default:
DEBUGOUT(" Error on VLAN mask\n");
return IXGBE_ERR_CONFIG;
}
- if (input_masks->flex_mask & 0xFFFF) {
- if ((input_masks->flex_mask & 0xFFFF) != 0xFFFF) {
+ switch (input_mask->formatted.flex_bytes & 0xFFFF) {
+ case 0x0000:
+ /* Mask Flex Bytes, fall through */
+ fdirm |= IXGBE_FDIRM_FLEX;
+ case 0xFFFF:
+ break;
+ default:
DEBUGOUT(" Error on flexible byte mask\n");
return IXGBE_ERR_CONFIG;
}
- /* Unmask Flex Bytes - bit 4 */
- fdirm &= ~IXGBE_FDIRM_FLEX;
- }
/* Now mask VM pool and destination IPv6 - bits 5 and 2 */
IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);
/* store the TCP/UDP port masks, bit reversed from port layout */
- fdirtcpm = ixgbe_get_fdirtcpm_82599(input_masks);
+ fdirtcpm = ixgbe_get_fdirtcpm_82599(input_mask);
/* write both the same so that UDP and TCP use the same mask */
IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
/* store source and destination IP masks (big-enian) */
IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
- ~input_masks->src_ip_mask[0]);
+ ~input_mask->formatted.src_ip[0]);
IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
- ~input_masks->dst_ip_mask[0]);
+ ~input_mask->formatted.dst_ip[0]);
- /* Apply masks to input data */
- input->formatted.vlan_id &= input_masks->vlan_id_mask;
- input->formatted.flex_bytes &= input_masks->flex_mask;
- input->formatted.src_port &= input_masks->src_port_mask;
- input->formatted.dst_port &= input_masks->dst_port_mask;
- input->formatted.src_ip[0] &= input_masks->src_ip_mask[0];
- input->formatted.dst_ip[0] &= input_masks->dst_ip_mask[0];
+ return IXGBE_SUCCESS;
+}
- /* record vlan (little-endian) and flex_bytes(big-endian) */
- fdirvlan =
- IXGBE_STORE_AS_BE16(IXGBE_NTOHS(input->formatted.flex_bytes));
- fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
- fdirvlan |= IXGBE_NTOHS(input->formatted.vlan_id);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);
+s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input,
+ u16 soft_id, u8 queue)
+{
+ u32 fdirport, fdirvlan, fdirhash, fdircmd;
+ DEBUGFUNC("ixgbe_fdir_write_perfect_filter_82599");
+
+ /* currently IPv6 is not supported, must be programmed with 0 */
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0),
+ input->formatted.src_ip[0]);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1),
+ input->formatted.src_ip[1]);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2),
+ input->formatted.src_ip[2]);
+
+ /* record the source address (big-endian) */
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]);
+
+ /* record the first 32 bits of the destination address (big-endian) */
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]);
+
/* record source and destination port (little-endian)*/
fdirport = IXGBE_NTOHS(input->formatted.dst_port);
fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT;
fdirport |= IXGBE_NTOHS(input->formatted.src_port);
IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);
- /* record the first 32 bits of the destination address (big-endian) */
- IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]);
+ /* record vlan (little-endian) and flex_bytes(big-endian) */
+ fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes);
+ fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
+ fdirvlan |= IXGBE_NTOHS(input->formatted.vlan_id);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);
- /* record the source address (big-endian) */
- IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]);
+ /* configure FDIRHASH register */
+ fdirhash = input->formatted.bkt_hash;
+ fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+ /*
+ * flush all previous writes to make certain registers are
+ * programmed prior to issuing the command
+ */
+ IXGBE_WRITE_FLUSH(hw);
+
/* configure FDIRCMD register */
fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+ if (queue == IXGBE_FDIR_DROP_QUEUE)
+ fdircmd |= IXGBE_FDIRCMD_DROP;
fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+ fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT;
- /* we only want the bucket hash so drop the upper 16 bits */
- fdirhash = ixgbe_atr_compute_hash_82599(input,
- IXGBE_ATR_BUCKET_HASH_KEY);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
+
+ return IXGBE_SUCCESS;
+}
+
+s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input,
+ u16 soft_id)
+{
+ u32 fdirhash;
+ u32 fdircmd = 0;
+ u32 retry_count;
+ s32 err = IXGBE_SUCCESS;
+
+ /* configure FDIRHASH register */
+ fdirhash = input->formatted.bkt_hash;
fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+ /* flush hash to HW */
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Query if filter is present */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT);
+
+ for (retry_count = 10; retry_count; retry_count--) {
+ /* allow 10us for query to process */
+ usec_delay(10);
+ /* verify query completed successfully */
+ fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD);
+ if (!(fdircmd & IXGBE_FDIRCMD_CMD_MASK))
+ break;
+ }
+
+ if (!retry_count)
+ err = IXGBE_ERR_FDIR_REINIT_FAILED;
+
+ /* if filter exists in hardware then remove it */
+ if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) {
IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
+ IXGBE_WRITE_FLUSH(hw);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+ IXGBE_FDIRCMD_CMD_REMOVE_FLOW);
+ }
- return IXGBE_SUCCESS;
+ return err;
}
/**
+ * ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter
+ * @hw: pointer to hardware structure
+ * @input: input bitstream
+ * @input_mask: mask for the input bitstream
+ * @soft_id: software index for the filters
+ * @queue: queue index to direct traffic to
+ *
+ * Note that the caller to this function must lock before calling, since the
+ * hardware writes must be protected from one another.
+ **/
+s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input,
+ union ixgbe_atr_input *input_mask,
+ u16 soft_id, u8 queue)
+{
+ s32 err = IXGBE_ERR_CONFIG;
+
+ DEBUGFUNC("ixgbe_fdir_add_perfect_filter_82599");
+
+ /*
+ * Check flow_type formatting, and bail out before we touch the hardware
+ * if there's a configuration issue
+ */
+ switch (input->formatted.flow_type) {
+ case IXGBE_ATR_FLOW_TYPE_IPV4:
+ input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK;
+ if (input->formatted.dst_port || input->formatted.src_port) {
+ DEBUGOUT(" Error on src/dst port\n");
+ return IXGBE_ERR_CONFIG;
+ }
+ break;
+ case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+ if (input->formatted.dst_port || input->formatted.src_port) {
+ DEBUGOUT(" Error on src/dst port\n");
+ return IXGBE_ERR_CONFIG;
+ }
+ case IXGBE_ATR_FLOW_TYPE_TCPV4:
+ case IXGBE_ATR_FLOW_TYPE_UDPV4:
+ input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK |
+ IXGBE_ATR_L4TYPE_MASK;
+ break;
+ default:
+ DEBUGOUT(" Error on flow type input\n");
+ return err;
+ }
+
+ /* program input mask into the HW */
+ err = ixgbe_fdir_set_input_mask_82599(hw, input_mask);
+ if (err)
+ return err;
+
+ /* apply mask and compute/store hash */
+ ixgbe_atr_compute_perfect_hash_82599(input, input_mask);
+
+ /* program filters to filter memory */
+ return ixgbe_fdir_write_perfect_filter_82599(hw, input,
+ soft_id, queue);
+}
+
+/**
* ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
* @hw: pointer to hardware structure
* @reg: analog register to read
* @val: read value
*
@@ -1838,22 +1862,22 @@
return IXGBE_SUCCESS;
}
/**
- * ixgbe_start_hw_rev_1_82599 - Prepare hardware for Tx/Rx
+ * ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx
* @hw: pointer to hardware structure
*
* Starts the hardware using the generic start_hw function
* and the generation start_hw function.
* Then performs revision-specific operations, if any.
**/
-s32 ixgbe_start_hw_rev_1_82599(struct ixgbe_hw *hw)
+s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
{
s32 ret_val = IXGBE_SUCCESS;
- DEBUGFUNC("ixgbe_start_hw_rev_1__82599");
+ DEBUGFUNC("ixgbe_start_hw_82599");
ret_val = ixgbe_start_hw_generic(hw);
if (ret_val != IXGBE_SUCCESS)
goto out;
@@ -1889,11 +1913,11 @@
if (status != IXGBE_SUCCESS) {
/* 82599 10GBASE-T requires an external PHY */
if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)
goto out;
else
- status = ixgbe_identify_sfp_module_generic(hw);
+ status = ixgbe_identify_module_generic(hw);
}
/* Set PHY type none if no PHY detected */
if (hw->phy.type == ixgbe_phy_unknown) {
hw->phy.type = ixgbe_phy_none;
@@ -1930,11 +1954,10 @@
hw->phy.ops.identify(hw);
switch (hw->phy.type) {
case ixgbe_phy_tn:
- case ixgbe_phy_aq:
case ixgbe_phy_cu_unknown:
hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability);
if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
@@ -2014,10 +2037,12 @@
physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_SX;
break;
default:
break;
}
@@ -2032,45 +2057,26 @@
*
* Enables the Rx DMA unit for 82599
**/
s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
{
-#define IXGBE_MAX_SECRX_POLL 30
- int i;
- int secrxreg;
DEBUGFUNC("ixgbe_enable_rx_dma_82599");
/*
* Workaround for 82599 silicon errata when enabling the Rx datapath.
* If traffic is incoming before we enable the Rx unit, it could hang
* the Rx DMA unit. Therefore, make sure the security engine is
* completely disabled prior to enabling the Rx unit.
*/
- secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
- secrxreg |= IXGBE_SECRXCTRL_RX_DIS;
- IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
- for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) {
- secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT);
- if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY)
- break;
- else
- /* Use interrupt-safe sleep just in case */
- usec_delay(10);
- }
- /* For informational purposes only */
- if (i >= IXGBE_MAX_SECRX_POLL)
- DEBUGOUT("Rx unit being enabled before security "
- "path fully disabled. Continuing with init.\n");
+ hw->mac.ops.disable_sec_rx_path(hw);
IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval);
- secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
- secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS;
- IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
- IXGBE_WRITE_FLUSH(hw);
+ hw->mac.ops.enable_sec_rx_path(hw);
+
return IXGBE_SUCCESS;
}
/**
* ixgbe_verify_fw_version_82599 - verify fw version for 82599
@@ -2110,12 +2116,11 @@
if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF))
goto fw_version_out;
/* get the firmware version */
hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset +
- IXGBE_FW_PATCH_VERSION_4),
- &fw_version);
+ IXGBE_FW_PATCH_VERSION_4), &fw_version);
if (fw_version > 0x5)
status = IXGBE_SUCCESS;
fw_version_out:
@@ -2164,6 +2169,72 @@
out:
return lesm_enabled;
}
+/**
+ * ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using
+ * fastest available method
+ *
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in EEPROM to read
+ * @words: number of words
+ * @data: word(s) read from the EEPROM
+ *
+ * Retrieves 16 bit word(s) read from EEPROM
+ **/
+static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ s32 ret_val = IXGBE_ERR_CONFIG;
+
+ DEBUGFUNC("ixgbe_read_eeprom_buffer_82599");
+
+ /*
+ * If EEPROM is detected and can be addressed using 14 bits,
+ * use EERD otherwise use bit bang
+ */
+ if ((eeprom->type == ixgbe_eeprom_spi) &&
+ (offset + (words - 1) <= IXGBE_EERD_MAX_ADDR))
+ ret_val = ixgbe_read_eerd_buffer_generic(hw, offset, words,
+ data);
+ else
+ ret_val = ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset,
+ words,
+ data);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_read_eeprom_82599 - Read EEPROM word using
+ * fastest available method
+ *
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM
+ **/
+static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
+ u16 offset, u16 *data)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ s32 ret_val = IXGBE_ERR_CONFIG;
+
+ DEBUGFUNC("ixgbe_read_eeprom_82599");
+
+ /*
+ * If EEPROM is detected and can be addressed using 14 bits,
+ * use EERD otherwise use bit bang
+ */
+ if ((eeprom->type == ixgbe_eeprom_spi) &&
+ (offset <= IXGBE_EERD_MAX_ADDR))
+ ret_val = ixgbe_read_eerd_generic(hw, offset, data);
+ else
+ ret_val = ixgbe_read_eeprom_bit_bang_generic(hw, offset, data);
+
+ return ret_val;
+}
+