Print this page
Modernize CDDL license text and copyrights for OmniTI-original code.
Factor out SetKeyboardLayout so a PXE server-side config can call it out.
Fix PXE regressions.
Do better on keyboard selection, plus save it in installed image.
Also, pv(1) output for install doesn't scroll anymore.
Kayak for ISO checkpoint 1
Initial foray into Kayak for ISO
*** 1,31 ****
#!/usr/bin/bash
#
! # CDDL HEADER START
#
! # The contents of this file are subject to the terms of the
! # Common Development and Distribution License, Version 1.0 only
! # (the "License"). You may not use this file except in compliance
! # with the License.
#
! # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
! # or http://www.opensolaris.org/os/licensing.
! # See the License for the specific language governing permissions
! # and limitations under the License.
#
! # When distributing Covered Code, include this CDDL HEADER in each
! # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
! # If applicable, add the following below this CDDL HEADER, with the
! # fields enclosed by brackets "[]" replaced with your own identifying
! # information: Portions Copyright [yyyy] [name of copyright owner]
#
! # CDDL HEADER END
! #
! #
! # Copyright 2012 OmniTI Computer Consulting, Inc. All rights reserved.
! # Use is subject to license terms.
! #
LOG_SETUP=0
ConsoleLog(){
exec 4>/dev/console
exec 1>>${1}
--- 1,22 ----
#!/usr/bin/bash
+
#
! # This file and its contents are supplied under the terms of the
! # Common Development and Distribution License ("CDDL"), version 1.0.
! # You may only use this file in accordance with the terms of version
! # 1.0 of the CDDL.
#
! # A full copy of the text of the CDDL should have accompanied this
! # source. A copy of the CDDL is also available via the Internet at
! # http://www.illumos.org/license/CDDL.
#
!
#
! # Copyright 2017 OmniTI Computer Consulting, Inc. All rights reserved.
#
!
LOG_SETUP=0
ConsoleLog(){
exec 4>/dev/console
exec 1>>${1}
*** 98,119 ****
log "Next server: $BOOTSRVA"
sleep 1
}
BuildBE() {
BOOTSRVA=`/sbin/dhcpinfo BootSrvA`
MEDIA=`getvar install_media`
MEDIA=`echo $MEDIA | sed -e "s%//\:%//$BOOTSRVA\:%g;"`
MEDIA=`echo $MEDIA | sed -e "s%///%//$BOOTSRVA/%g;"`
! zfs set compression=on rpool
! zfs create rpool/ROOT
! zfs set canmount=off rpool/ROOT
! zfs set mountpoint=legacy rpool/ROOT
log "Receiving image: $MEDIA"
! curl -s $MEDIA | pv -B 128m | bzip2 -dc | zfs receive -u rpool/ROOT/omnios
! zfs set canmount=noauto rpool/ROOT/omnios
! zfs set mountpoint=legacy rpool/ROOT/omnios
log "Cleaning up boot environment"
beadm mount omnios /mnt
ALTROOT=/mnt
cp $ALTROOT/lib/svc/seed/global.db $ALTROOT/etc/svc/repository.db
chmod 0600 $ALTROOT/etc/svc/repository.db
--- 89,122 ----
log "Next server: $BOOTSRVA"
sleep 1
}
BuildBE() {
+ RPOOL=${1:-rpool}
+ if [[ -z $2 ]]; then
BOOTSRVA=`/sbin/dhcpinfo BootSrvA`
MEDIA=`getvar install_media`
MEDIA=`echo $MEDIA | sed -e "s%//\:%//$BOOTSRVA\:%g;"`
MEDIA=`echo $MEDIA | sed -e "s%///%//$BOOTSRVA/%g;"`
! DECOMP="bzip2 -dc"
! GRAB="curl -s"
! else
! # ASSUME $2 is a file path. TODO: Parse the URL...
! MEDIA=$2
! # TODO: make switch statement based on $MEDIA's extension.
! # e.g. "bz2" ==> "bzip -dc", "7z" ==>
! DECOMP="bzip2 -dc"
! GRAB=cat
! fi
! zfs set compression=on $RPOOL
! zfs create $RPOOL/ROOT
! zfs set canmount=off $RPOOL/ROOT
! zfs set mountpoint=legacy $RPOOL/ROOT
log "Receiving image: $MEDIA"
! $GRAB $MEDIA | pv -B 128m -w 78 | $DECOMP | zfs receive -u $RPOOL/ROOT/omnios
! zfs set canmount=noauto $RPOOL/ROOT/omnios
! zfs set mountpoint=legacy $RPOOL/ROOT/omnios
log "Cleaning up boot environment"
beadm mount omnios /mnt
ALTROOT=/mnt
cp $ALTROOT/lib/svc/seed/global.db $ALTROOT/etc/svc/repository.db
chmod 0600 $ALTROOT/etc/svc/repository.db
*** 120,130 ****
chown root:sys $ALTROOT/etc/svc/repository.db
/usr/sbin/devfsadm -r /mnt
[[ -L $ALTROOT/dev/msglog ]] || \
ln -s ../devices/pseudo/sysmsg@0:msglog $ALTROOT/dev/msglog
MakeSwapDump
! zfs destroy rpool/ROOT/omnios@kayak
}
FetchConfig(){
ETHER=`Ether`
BOOTSRVA=`/sbin/dhcpinfo BootSrvA`
--- 123,133 ----
chown root:sys $ALTROOT/etc/svc/repository.db
/usr/sbin/devfsadm -r /mnt
[[ -L $ALTROOT/dev/msglog ]] || \
ln -s ../devices/pseudo/sysmsg@0:msglog $ALTROOT/dev/msglog
MakeSwapDump
! zfs destroy $RPOOL/ROOT/omnios@kayak
}
FetchConfig(){
ETHER=`Ether`
BOOTSRVA=`/sbin/dhcpinfo BootSrvA`
*** 147,169 ****
done
return 1
}
MakeBootable(){
log "Making boot environment bootable"
! zpool set bootfs=rpool/ROOT/omnios rpool
# Must do beadm activate first on the off chance we're bootstrapping from
# GRUB.
! beadm activate omnios
# NOTE: This installboot loop assumes we're doing GPT whole-disk rpools.
for i in `cat /tmp/kayak-disk-list`
do
! installboot -mf /boot/pmbr /boot/gptzfsboot /dev/rdsk/${i}s0
done
! bootadm update-archive -R $ALTROOT
return 0
}
SetHostname()
{
--- 150,181 ----
done
return 1
}
MakeBootable(){
+ RPOOL=${1:-rpool}
log "Making boot environment bootable"
! zpool set bootfs=$RPOOL/ROOT/omnios rpool
# Must do beadm activate first on the off chance we're bootstrapping from
# GRUB.
! beadm activate omnios || return 1
+ if [[ ! -z $1 ]]; then
+ # Generate kayak-disk-list from zpool status.
+ # NOTE: If this is something on non-s0 slices, the installboot below
+ # will fail most likely, which is possibly a desired result.
+ zpool list -v $RPOOL | egrep -v "NAME|rpool|mirror" | \
+ awk '{print $1}' | sed -E 's/s0$//g' > /tmp/kayak-disk-list
+ fi
+
# NOTE: This installboot loop assumes we're doing GPT whole-disk rpools.
for i in `cat /tmp/kayak-disk-list`
do
! installboot -mfF /boot/pmbr /boot/gptzfsboot /dev/rdsk/${i}s0 || return 1
done
! bootadm update-archive -R $ALTROOT || return 1
return 0
}
SetHostname()
{
*** 191,206 ****
--- 203,261 ----
{
log "Setting timezone: ${1}"
sed -i -e "s:^TZ=.*:TZ=${1}:" $ALTROOT/etc/default/init
}
+ SetLang()
+ {
+ log "Setting language: ${1}"
+ sed -i -e "s:^LANG=.*:LANG=${1}:" $ALTROOT/etc/default/init
+ }
+
+ SetKeyboardLayout()
+ {
+ # Put the new keyboard layout ($1) in
+ # "setprop keyboard-layout <foo>" in the newly-installed root's
+ # /boot/solaris/bootenv.rc (aka. eeprom(1M) storage for amd64/i386).
+ layout=$1
+ sed "s/keyboard-layout Unknown/keyboard-layout $layout/g" \
+ < $ALTROOT/boot/solaris/bootenv.rc > /tmp/bootenv.rc
+ mv /tmp/bootenv.rc $ALTROOT/boot/solaris/bootenv.rc
+ # Also modify the SMF manifest, assuming US-English was set by default.
+ sed "s/US-English/$layout/g" \
+ < $ALTROOT/lib/svc/manifest/system/keymap.xml > /tmp/keymap.xml
+ cp -f /tmp/keymap.xml $ALTROOT/lib/svc/manifest/system/keymap.xml
+ }
+
ApplyChanges(){
SetRootPW
[[ -L $ALTROOT/etc/svc/profile/generic.xml ]] || \
ln -s generic_limited_net.xml $ALTROOT/etc/svc/profile/generic.xml
[[ -L $ALTROOT/etc/svc/profile/name_service.xml ]] || \
ln -s ns_dns.xml $ALTROOT/etc/svc/profile/name_service.xml
+
+ # Extras from interactive ISO/USB install...
+ # arg1 == hostname
+ if [[ ! -z $1 ]]; then
+ SetHostname $1
+ fi
+
+ # arg2 == timezone
+ if [[ ! -z $2 ]]; then
+ SetTimezone $2
+ fi
+
+ # arg3 == Language
+ if [[ ! -z $3 ]]; then
+ SetLang $3
+ fi
+
+ # arg4 == Keyboard layout
+ if [[ ! -z $4 ]]; then
+ SetKeyboardLayout $4
+ fi
+
return 0
}
Postboot() {
[[ -f $ALTROOT/.initialboot ]] || touch $ALTROOT/.initialboot
*** 217,227 ****
svcadm refresh svc:/system/boot-config:default
reboot
}
RunInstall(){
! FetchConfig || bomb "Could not fecth kayak config for target"
. $ICFILE
Postboot 'exit $SMF_EXIT_OK'
ApplyChanges || bomb "Could not apply all configuration changes"
MakeBootable || bomb "Could not make new BE bootable"
log "Install complete"
--- 272,284 ----
svcadm refresh svc:/system/boot-config:default
reboot
}
RunInstall(){
! FetchConfig || bomb "Could not fetch kayak config for target"
! # Set RPOOL if it wasn't done so already. We need it set.
! RPOOL=${RPOOL:-rpool}
. $ICFILE
Postboot 'exit $SMF_EXIT_OK'
ApplyChanges || bomb "Could not apply all configuration changes"
MakeBootable || bomb "Could not make new BE bootable"
log "Install complete"