6 # You may not use this file except in compliance with the License.
   7 #
   8 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
   9 # or http://www.opensolaris.org/os/licensing.
  10 # See the License for the specific language governing permissions
  11 # and limitations under the License.
  12 #
  13 # When distributing Covered Code, include this CDDL HEADER in each
  14 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  15 # If applicable, add the following below this CDDL HEADER, with the
  16 # fields enclosed by brackets "[]" replaced with your own identifying
  17 # information: Portions Copyright [yyyy] [name of copyright owner]
  18 #
  19 # CDDL HEADER END
  20 #
  21 #
  22 # uts/intel/icmp/Makefile
  23 #
  24 # Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
  25 # Use is subject to license terms.

  26 #
  27 #       This makefile drives the production of the icmp IP driver
  28 #
  29 #       intel implementation architecture dependent
  30 #
  31 
  32 #
  33 #       Path to the base of the uts directory tree (usually /usr/src/uts).
  34 #
  35 UTSBASE = ../..
  36 
  37 #
  38 #       Define the module and object file sets.
  39 #
  40 MODULE          = icmp
  41 OBJECTS         = $(ICMP_OBJS:%=$(OBJS_DIR)/%)
  42 LINTS           = $(ICMP_OBJS:%.o=$(LINTS_DIR)/%.ln)
  43 ROOTMODULE      = $(ROOT_DRV_DIR)/$(MODULE)
  44 ROOTLINK        = $(ROOT_STRMOD_DIR)/$(MODULE) $(ROOT_SOCK_DIR)/$(MODULE)
  45 CONF_SRCDIR     = $(UTSBASE)/common/inet/ip
  46 
  47 #
  48 # Extra for $(MODULE).check target
  49 #
  50 # Need to remove ipddi.o since it has non-static defines for _init etc.
  51 IP_CHECK_OBJS   = $(IP_OBJS:ipddi.o=ip.o)
  52 EXTRA_CHECK_OBJS = $(IP_CHECK_OBJS:%=../ip/$(OBJS_DIR)/%)
  53 
  54 #
  55 #       Include common rules.
  56 #
  57 include $(UTSBASE)/intel/Makefile.intel
  58 
  59 #
  60 #       Define targets
  61 #
  62 ALL_TARGET      = $(BINARY) $(SRC_CONFFILE)
  63 LINT_TARGET     = $(MODULE).lint
  64 INSTALL_TARGET  = $(BINARY) $(ROOTMODULE) $(ROOTLINK) $(ROOT_CONFFILE)
  65 


  66 #
  67 #       depends on ip and sockfs
  68 #
  69 LDFLAGS         += -dy -Ndrv/ip -Nfs/sockfs
  70 
  71 #
  72 # For now, disable these lint checks; maintainers should endeavor
  73 # to investigate and remove these for maximum lint coverage.
  74 # Please do not carry these forward to new Makefiles.
  75 #
  76 LINTTAGS        += -erroff=E_BAD_PTR_CAST_ALIGN
  77 LINTTAGS        += -erroff=E_PTRDIFF_OVERFLOW
  78 LINTTAGS        += -erroff=E_ASSIGN_NARROW_CONV
  79 
  80 #
  81 #       Default build targets.
  82 #
  83 .KEEP_STATE:
  84 
  85 def:            $(DEF_DEPS)

   6 # You may not use this file except in compliance with the License.
   7 #
   8 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
   9 # or http://www.opensolaris.org/os/licensing.
  10 # See the License for the specific language governing permissions
  11 # and limitations under the License.
  12 #
  13 # When distributing Covered Code, include this CDDL HEADER in each
  14 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  15 # If applicable, add the following below this CDDL HEADER, with the
  16 # fields enclosed by brackets "[]" replaced with your own identifying
  17 # information: Portions Copyright [yyyy] [name of copyright owner]
  18 #
  19 # CDDL HEADER END
  20 #
  21 #
  22 # uts/intel/icmp/Makefile
  23 #
  24 # Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
  25 # Use is subject to license terms.
  26 # Copyright 2016 Joyent, Inc.
  27 #
  28 #       This makefile drives the production of the icmp IP driver
  29 #
  30 #       intel implementation architecture dependent
  31 #
  32 
  33 #
  34 #       Path to the base of the uts directory tree (usually /usr/src/uts).
  35 #
  36 UTSBASE = ../..
  37 
  38 #
  39 #       Define the module and object file sets.
  40 #
  41 MODULE          = icmp
  42 OBJECTS         = $(ICMP_OBJS:%=$(OBJS_DIR)/%)
  43 LINTS           = $(ICMP_OBJS:%.o=$(LINTS_DIR)/%.ln)
  44 ROOTMODULE      = $(ROOT_DRV_DIR)/$(MODULE)
  45 ROOTLINK        = $(ROOT_STRMOD_DIR)/$(MODULE) $(ROOT_SOCK_DIR)/$(MODULE)
  46 CONF_SRCDIR     = $(UTSBASE)/common/inet/ip
  47 
  48 #
  49 # Extra for $(MODULE).check target
  50 #
  51 # Need to remove ipddi.o since it has non-static defines for _init etc.
  52 IP_CHECK_OBJS   = $(IP_OBJS:ipddi.o=ip.o)
  53 EXTRA_CHECK_OBJS = $(IP_CHECK_OBJS:%=../ip/$(OBJS_DIR)/%)
  54 
  55 #
  56 #       Include common rules.
  57 #
  58 include $(UTSBASE)/intel/Makefile.intel
  59 
  60 #
  61 #       Define targets
  62 #
  63 ALL_TARGET      = $(BINARY) $(SRC_CONFFILE)
  64 LINT_TARGET     = $(MODULE).lint
  65 INSTALL_TARGET  = $(BINARY) $(ROOTMODULE) $(ROOTLINK) $(ROOT_CONFFILE)
  66 
  67 INC_PATH        += -I$(UTSBASE)/common/io/bpf
  68 
  69 #
  70 #       depends on ip and sockfs
  71 #
  72 LDFLAGS         += -dy -Ndrv/ip -Nfs/sockfs
  73 
  74 #
  75 # For now, disable these lint checks; maintainers should endeavor
  76 # to investigate and remove these for maximum lint coverage.
  77 # Please do not carry these forward to new Makefiles.
  78 #
  79 LINTTAGS        += -erroff=E_BAD_PTR_CAST_ALIGN
  80 LINTTAGS        += -erroff=E_PTRDIFF_OVERFLOW
  81 LINTTAGS        += -erroff=E_ASSIGN_NARROW_CONV
  82 
  83 #
  84 #       Default build targets.
  85 #
  86 .KEEP_STATE:
  87 
  88 def:            $(DEF_DEPS)