re #6874 rb1789 sgen autoload fixes

*** 92,102 ****
  #
  # In this example, sgen is configured to bind to all scanner and ocrw devices in
  # the system, as well as the UltraToast 4000 from ACME, and the PowerToast
  # series of devices, regardless of vendor.
  #
! #device-type-config-list="scanner", "ocrw";
  #
  #inquiry-config-list=   "ACME",         "UltraToast 4000",
  #                       "*",            "PowerToast";
  #
  # When using the sgen.conf method, after configuring the
--- 92,102 ----
  #
  # In this example, sgen is configured to bind to all scanner and ocrw devices in
  # the system, as well as the UltraToast 4000 from ACME, and the PowerToast
  # series of devices, regardless of vendor.
  #
! device-type-config-list="changer", "sequential";
  #
  #inquiry-config-list=   "ACME",         "UltraToast 4000",
  #                       "*",            "PowerToast";
  #
  # When using the sgen.conf method, after configuring the
*** 104,125 ****
  # must uncomment those target/lun pairs at which there are devices for sgen to
  # control.  If it is expected that devices controlled by sgen will be hotplugged
  # or added into the system later, it is recommended that all of the following
  # lines be uncommented.
  #
! #name="sgen" class="scsi" target=0 lun=0;
! #name="sgen" class="scsi" target=1 lun=0;
! #name="sgen" class="scsi" target=2 lun=0;
! #name="sgen" class="scsi" target=3 lun=0;
! #name="sgen" class="scsi" target=4 lun=0;
! #name="sgen" class="scsi" target=5 lun=0;
! #name="sgen" class="scsi" target=6 lun=0;
! #name="sgen" class="scsi" target=7 lun=0;
! #name="sgen" class="scsi" target=8 lun=0;
! #name="sgen" class="scsi" target=9 lun=0;
! #name="sgen" class="scsi" target=10 lun=0;
! #name="sgen" class="scsi" target=11 lun=0;
! #name="sgen" class="scsi" target=12 lun=0;
! #name="sgen" class="scsi" target=13 lun=0;
! #name="sgen" class="scsi" target=14 lun=0;
! #name="sgen" class="scsi" target=15 lun=0;
  
--- 104,125 ----
  # must uncomment those target/lun pairs at which there are devices for sgen to
  # control.  If it is expected that devices controlled by sgen will be hotplugged
  # or added into the system later, it is recommended that all of the following
  # lines be uncommented.
  #
! name="sgen" class="scsi" target=0 lun=0;
! name="sgen" class="scsi" target=1 lun=0;
! name="sgen" class="scsi" target=2 lun=0;
! name="sgen" class="scsi" target=3 lun=0;
! name="sgen" class="scsi" target=4 lun=0;
! name="sgen" class="scsi" target=5 lun=0;
! name="sgen" class="scsi" target=6 lun=0;
! name="sgen" class="scsi" target=7 lun=0;
! name="sgen" class="scsi" target=8 lun=0;
! name="sgen" class="scsi" target=9 lun=0;
! name="sgen" class="scsi" target=10 lun=0;
! name="sgen" class="scsi" target=11 lun=0;
! name="sgen" class="scsi" target=12 lun=0;
! name="sgen" class="scsi" target=13 lun=0;
! name="sgen" class="scsi" target=14 lun=0;
! name="sgen" class="scsi" target=15 lun=0;