1 #
   2 # CDDL HEADER START
   3 #
   4 # The contents of this file are subject to the terms of the
   5 # Common Development and Distribution License, v.1,  (the "License").
   6 # You may not use this file except in compliance with the License.
   7 #
   8 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
   9 # or http://opensource.org/licenses/CDDL-1.0.
  10 # See the License for the specific language governing permissions
  11 # and limitations under the License.
  12 #
  13 # When distributing Covered Code, include this CDDL HEADER in each
  14 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  15 # If applicable, add the following below this CDDL HEADER, with the
  16 # fields enclosed by brackets "[]" replaced with your own identifying
  17 # information: Portions Copyright [yyyy] [name of copyright owner]
  18 #
  19 # CDDL HEADER END
  20 #
  21 
  22 #
  23 # Copyright 2014-2017 Cavium, Inc. 
  24 # The contents of this file are subject to the terms of the Common Development 
  25 # and Distribution License, v.1,  (the "License").
  26 #
  27 # You may not use this file except in compliance with the License.
  28 #
  29 # You can obtain a copy of the License at available 
  30 # at http://opensource.org/licenses/CDDL-1.0
  31 #
  32 # See the License for the specific language governing permissions and 
  33 # limitations under the License.
  34 #
  35 
  36 #
  37 #
  38 #  checksum - configures checksum offloading capability
  39 #           - default is TCP/UDP/IPv4 checksum offload for rx/tx
  40 #           - 0 = no checksum offload
  41 #           - 1 = IPv4 checksum offload for rx/tx
  42 # default_checksum=1;
  43 #
  44 #
  45 # rx_ring_size-configures the number of RX packet descriptors to allocate per ring
  46 #          - valid range is 1024 to 8192
  47 #          - default is 8192
  48 # default_rx_ring_size=8192;
  49 #
  50 # tx_ring_size-configures the number of RX packet descriptors to allocate per ring
  51 #          - valid range is 1024 to 8192
  52 #          - default is 8192
  53 # default_tx_ring_size=8192;
  54 #
  55 # lso_enable - enable TCP Large Segment Offload (LSO)
  56 #            - default enabled
  57 #            - 0 = disabled / 1 = enabled
  58 # default_lso_enable=1;
  59 #qede0_lso_enable=0;
  60 #qede1_lso_enable=0;
  61 #qede2_lso_enable=0;
  62 #qede3_lso_enable=0;
  63 #
  64 # lro_enable - enable TCP Large Receive Offload (LRO)
  65 #            - default enabled
  66 #            - 0 = disabled / 1 = enabled
  67 # default_lro_enable=1;
  68 #qede0_lro_enable=0;
  69 #qede1_lro_enable=0;
  70 #qede2_lro_enable=0;
  71 #qede3_lro_enable=0;
  72 #
  73 # num_fp - configures the number of rings to allocate
  74 #           - valid values are 1,2,3,4,5,6
  75 #           - default is 4 which implies:
  76 #               - 4 rings for single function mode
  77 #default_num_fp=4;
  78 #
  79 # mtu - hardware MTU size
  80 #     - valid values are 1500, 9000 
  81 #     - default is 1500
  82 # default_mtu=1500;
  83 #qede0_mtu=9000;
  84 #qede1_mtu=9000;
  85 #qede2_mtu=9000;
  86 #qede3_mtu=9000;
  87 #