NEX-17006 backport mpt_sas tri-mode parts support change
9044 Need support for mpt_sas tri-mode parts
9045 Clean up mpt_sas compiler warnings
9046 mptsas_handle_topo_change can return without its locks held
9047 workaround SAS3408 firmware issue
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Hans Rosenfeld <hans.rosenfeld@joyent.com>
Reviewed by: Albert Lee <trisk@forkgnu.org>
Reviewed by: Yuri Pankov <yuripv@yuripv.net>
Approved by: Richard Lowe <richlowe@richlowe.net>
NEX-1889 mpt_sas should support 12G HBAs

@@ -8,14 +8,15 @@
 SYNOPSIS
          scsi@unit-address
 
 
 DESCRIPTION
-       The mpt_sas host bus adapter driver is a nexus driver that supports the
-       LSI SAS200x/2x08 and SAS300x/3x08 series of chips. These chips support
-       SAS/SATA interfaces, including tagged and untagged queuing, SATA 3G/SAS
-       3G/SAS 6G/SAS 12G.
+       The mpt_sas host bus adapter driver is a nexus driver that supports
+       Broadcom (formerly LSI and Avago) SAS chipsets including the
+       SAS200x/2x08/2x16 and SAS300x/3x08/3x16/3x24 series of chips. These
+       chips support SAS/SATA interfaces, including tagged and untagged
+       queuing, SATA 3G/SAS 3G/SAS 6G/SAS 12G.
 
    Configuration
        The mpt_sas driver is configured by defining properties in
        mpt_sas.conf. These properties override the global SCSI settings. The
        mpt_sas driver supports one modifiable property:

@@ -90,6 +91,6 @@
        scsi_hba_attach_setup(9F), scsi_ifgetcap(9F), scsi_ifsetcap(9F),
        scsi_pkt(9S), scsi_reset(9F), scsi_sync_pkt(9F), scsi_transport(9F),
 
 
 
-                                April 24, 2014                     MPT_SAS(7D)
+                               December 15, 2017                   MPT_SAS(7D)