Print this page
NEX-17006 backport mpt_sas tri-mode parts support change
9044 Need support for mpt_sas tri-mode parts
9045 Clean up mpt_sas compiler warnings
9046 mptsas_handle_topo_change can return without its locks held
9047 workaround SAS3408 firmware issue
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Hans Rosenfeld <hans.rosenfeld@joyent.com>
Reviewed by: Albert Lee <trisk@forkgnu.org>
Reviewed by: Yuri Pankov <yuripv@yuripv.net>
Approved by: Richard Lowe <richlowe@richlowe.net>
NEX-1889 mpt_sas should support 12G HBAs
*** 8,21 ****
SYNOPSIS
scsi@unit-address
DESCRIPTION
! The mpt_sas host bus adapter driver is a nexus driver that supports the
! LSI SAS200x/2x08 and SAS300x/3x08 series of chips. These chips support
! SAS/SATA interfaces, including tagged and untagged queuing, SATA 3G/SAS
! 3G/SAS 6G/SAS 12G.
Configuration
The mpt_sas driver is configured by defining properties in
mpt_sas.conf. These properties override the global SCSI settings. The
mpt_sas driver supports one modifiable property:
--- 8,22 ----
SYNOPSIS
scsi@unit-address
DESCRIPTION
! The mpt_sas host bus adapter driver is a nexus driver that supports
! Broadcom (formerly LSI and Avago) SAS chipsets including the
! SAS200x/2x08/2x16 and SAS300x/3x08/3x16/3x24 series of chips. These
! chips support SAS/SATA interfaces, including tagged and untagged
! queuing, SATA 3G/SAS 3G/SAS 6G/SAS 12G.
Configuration
The mpt_sas driver is configured by defining properties in
mpt_sas.conf. These properties override the global SCSI settings. The
mpt_sas driver supports one modifiable property:
*** 90,95 ****
scsi_hba_attach_setup(9F), scsi_ifgetcap(9F), scsi_ifsetcap(9F),
scsi_pkt(9S), scsi_reset(9F), scsi_sync_pkt(9F), scsi_transport(9F),
! April 24, 2014 MPT_SAS(7D)
--- 91,96 ----
scsi_hba_attach_setup(9F), scsi_ifgetcap(9F), scsi_ifsetcap(9F),
scsi_pkt(9S), scsi_reset(9F), scsi_sync_pkt(9F), scsi_transport(9F),
! December 15, 2017 MPT_SAS(7D)