1 '\" te
2 .\" Copyright (C) 2009, Sun Microsystems, Inc. All Rights Reserved.
3 .\" Copyright 2014 Nexenta Systems, Inc. All rights reserved.
4 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
5 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
6 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
7 .TH NDMP 4 "Feb 24, 2014"
8 .SH NAME
9 ndmp \- configuration properties for Solaris Network Data Management Protocol
10 (NDMP) server
11 .SH DESCRIPTION
12 .sp
13 .LP
14 The behavior of the Solaris NDMP server is specified by property values that
15 are stored in the Service Management Facility, \fBsmf\fR(5).
16 .sp
17 .LP
18 An authorized user can use the \fBndmpadm\fR(1M) command to set global values
19 for these properties in SMF.
20 .sp
21 .LP
22 You can set the following properties by using the \fBndmpadm set\fR command:
23 .sp
110 .RS 24n
111 Enable or disable backing up the directories containing modified files or
112 directories in \fBtar\fR(1) backup format. Acceptable values are \fByes\fR or
113 \fBno\fR. The default value is \fBno\fR.
114 .RE
115
116 .sp
117 .ne 2
118 .na
119 \fB\fBtoken-maxseq\fR\fR
120 .ad
121 .RS 24n
122 Set the maximum sequence number for subsequent token-based incremental backup
123 in NDMP-V4. The default value is \fB9\fR. There are two limits for this value:
124 soft-limit, which is \fB59\fR, and hard-limit, equal to \fB64\fR. If the token
125 sequence number, passed by the DMA, is between the soft and hard limits, a
126 warning message is issued to the DMA. The token sequence number can never
127 exceed the hard-limit value.
128 .RE
129
130 .sp
131 .ne 2
132 .na
133 \fB\fBversion\fR\fR
134 .ad
135 .RS 24n
136 Set the maximum active NDMP protocol version. Valid values are currently
137 \fB2\fR, \fB3\fR, and \fB4\fR. The default is \fB4\fR.
138 .RE
139
140 .sp
141 .LP
142 The following property can only be set when using the \fBndmpadm enable\fR or
143 \fBndmpadm disable\fR command:
144 .sp
145 .ne 2
146 .na
147 \fB\fBauth-type\fR\fR
148 .ad
149 .RS 13n
|
1 '\" te
2 .\" Copyright (C) 2009, Sun Microsystems, Inc. All Rights Reserved.
3 .\" Copyright 2017 Nexenta Systems, Inc. All rights reserved.
4 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
5 .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
6 .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
7 .TH NDMP 4 "Feb 24, 2014"
8 .SH NAME
9 ndmp \- configuration properties for Solaris Network Data Management Protocol
10 (NDMP) server
11 .SH DESCRIPTION
12 .sp
13 .LP
14 The behavior of the Solaris NDMP server is specified by property values that
15 are stored in the Service Management Facility, \fBsmf\fR(5).
16 .sp
17 .LP
18 An authorized user can use the \fBndmpadm\fR(1M) command to set global values
19 for these properties in SMF.
20 .sp
21 .LP
22 You can set the following properties by using the \fBndmpadm set\fR command:
23 .sp
110 .RS 24n
111 Enable or disable backing up the directories containing modified files or
112 directories in \fBtar\fR(1) backup format. Acceptable values are \fByes\fR or
113 \fBno\fR. The default value is \fBno\fR.
114 .RE
115
116 .sp
117 .ne 2
118 .na
119 \fB\fBtoken-maxseq\fR\fR
120 .ad
121 .RS 24n
122 Set the maximum sequence number for subsequent token-based incremental backup
123 in NDMP-V4. The default value is \fB9\fR. There are two limits for this value:
124 soft-limit, which is \fB59\fR, and hard-limit, equal to \fB64\fR. If the token
125 sequence number, passed by the DMA, is between the soft and hard limits, a
126 warning message is issued to the DMA. The token sequence number can never
127 exceed the hard-limit value.
128 .RE
129
130 .sp
131 .ne 2
132 .na
133 \fB\fBautosync-support\fR\fR
134 .ad
135 .RS 24n
136 When set \fByes\fR the most recent AutoSync snapshot, if found, will be
137 used to back up. If \fBno\fR, the file system will be checkpointed
138 and backed up.
139 Acceptable values are \fByes\fR or \fBno\fR.
140 The default is \fBno\fR.
141 .RE
142
143 .sp
144 .ne 2
145 .na
146 \fB\fBhpr-support\fR\fR
147 .ad
148 .RS 24n
149 When set \fByes\fR the most recent HPR snapshot, if found, will be
150 used to back up. If this option is set to \fByes\fR, it
151 with override the setting for AutoSync. If \fBno\fR, the file
152 system will be checkpointed and backed up.
153 Acceptable values are \fByes\fR or \fBno\fR.
154 The default is \fByes\fR.
155 .RE
156
157 .sp
158 .ne 2
159 .na
160 \fB\fBversion\fR\fR
161 .ad
162 .RS 24n
163 Set the maximum active NDMP protocol version. Valid values are currently
164 \fB2\fR, \fB3\fR, and \fB4\fR. The default is \fB4\fR.
165 .RE
166
167 .sp
168 .LP
169 The following property can only be set when using the \fBndmpadm enable\fR or
170 \fBndmpadm disable\fR command:
171 .sp
172 .ne 2
173 .na
174 \fB\fBauth-type\fR\fR
175 .ad
176 .RS 13n
|